Product Configurations for RFQ
No configurations.
10-2J06.3145
Single-LED
Single-LED
Products Use this page to obtain data and define your preferred products by: Switch function, by market suitability, by EAO Series, or through a parametric search.
3D drawings Once a product details page has been selected technical data and 3D drawings can be downloaded.
Requests for quotation You can save your selected product configuration and request an RFQ.
10-2J06.3145 - Single-LED
Attention: The preview is based on a sample product. This can differ from your current configuration.
Additional information
- Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)
- When using AC/DC types with AC operation, slight flickering can occur
- The luminous intensity stated is for when used with DC
- Electrical and optical data are measured at 25 °C
- The specified versions are built with a protection diode (halve wave rectifier) in series and the LED
- Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
- Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.
- Keep to the country specific safety instructions
Specification
Attribute
| Dom. Wavelength | 525 nm |
| Illumination colour | Green |
| Lumi. Intensity 1 value | 1050 mcd |
| Lumi. Intensity | 1050 mcd |
| Operation current | 7 mA ±15 % |
| Operating voltage | 6 V DC +10% |
| Operating Voltage/Current | 6 V +10% 7 mA ±15 % |
| Socket | T1 ¾ MG |
| Weight | 0.002 kg |
Select actuator
